Sacom | Shop
Wide Range of Components from World-Class Manufacturers 

            
            
  • LINEAR GUIDEWAYS
  • BALLSCREWS
  • TRAPEZOIDAL SCREWS AND NUTS
  • AUTOMATION
  • BEARINGS
  • BUSHINGS AND SHAFTS
  • SERVICE
  • RACKS, PINIONS
-
Deep groove ball bearing, radial contact, pressed steel cage, spherical outer diameter, contact seals on both sides.
Product analogs:
SNR 6208SEE
SKF 1726208-2RS1
INA 208-XL-NPP-B
12.03 € 12.030000000000001 EUR
-
Deep groove ball bearing, radial contact, pressed steel cage, spherical outer diameter, contact seals on both sides.
Product analogs:
SNR 6209SEE
SKF 1726209-2RS1
INA 209-XL-NPP-B
14.37 € 14.370000000000001 EUR
-
Deep groove ball bearing, radial contact, pressed steel cage, spherical outer diameter, contact seals on both sides.
Product analogs:
SNR 6210SEE
SKF 1726210-2RS1
INA 210-XL-NPP-B
16.12 € 16.12 EUR
-
Deep groove ball bearing, radial contact, pressed steel cage, spherical outer diameter, contact seals on both sides.
Product analogs:
SNR 6308SEE
SKF 1726308-2RS1
16.09 € 16.09 EUR
-
Deep groove ball bearing, radial contact, pressed steel cage, spherical outer diameter, contact seals on both sides.
Product analogs:
SNR 6309SEE
SKF 1726309-2RS1
25.44 € 25.44 EUR
-
Kinco CV100-2S-0022G frequency converter.
Rated power 2.2 kW.
Input voltage 230 VAC.
Current rated (peak) 10 (18) A.
Output Frequency 0 Hz...300 Hz.
Communication protocol: Modbus RTU.
Control: Vector, Scalar.
User-configurable I/O: 5 DI, 2 DO, 2 AI and 1 AO.
178.00 € 178.0 EUR
-
Assembly plug for ball transfer units with fatening element ball diameter 30mm bore 30mm
50.00 € 50.0 EUR
-
Ball transfer unit CY-30:

Cross References
65433030 (MADLER)
530013 (ALWAYSE)

• Body Material: Galvanized sheet steel
(provides corrosion resistance and mechanical strength)
• Main (support) ball diameter: 30 mm
• Ball Material: Can be made of steel G200
• Load Capacity: Typically ranges from 85 kg per unit
• Application: Allows easy movement of goods in any direction
2.12 € 2.12 EUR
-
Tolerance ring 47x12mm for ball transfer unit CY-30.
2.00 € 2.0 EUR
-
Hiwin D2T-0423-S-B4 servo driver.
Rated power 400 W.
Input voltage 230 VAC.
Current rated (peak) 2.5 (3.7) A
D2T-0423-S-B4 takes Pulse+Direction control modes.
User-configurable I/O: 9 DI, 4 DO and 1 AI.
442.00 € 442.0 EUR
-
Leadshine D57CM31-4A NEMA 23 stepper motor.
Holding torque 3.1 Nm.
Current 4 A.
88 mm (3.46 inch) long.
8 mm (0.315 inch) shaft size.
33.00 € 33.0 EUR
-
Leadshine DM432C stepper driver.
Input voltage of 18 - 40 VDC.
Output current of 0.10 - 3.20 A.
DM432C takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine DM432C is easy to setup and configure via DIP switches.
55.00 € 55.0 EUR
-
Leadshine DM556E stepper driver.
Input voltage of 18 - 50 VDC.
Output current of 1.80 - 5.60 A.
DM556E takes step & direction (PUL/DIR) control. Stepper driver Leadshine DM556E is easy to setup and configure via DIP switches.
48.40 € 48.4 EUR
-
Leadshine DM860E. 2-phase and 4-phase stepper driver.
Input voltage of 24 - 74 VDC.
Output current of 2.40 - 7.20 A.
DM860E takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine DM860E is easy to setup and configure via DIP switches.
66.00 € 66.0 EUR
-
Hiwin ED2S-V0-003-1-C-00 servo driver.
Rated power 500 W.
Input voltage 230 VAC.
Current rated (peak) 3.0 (12.0) A
ED2S-V0-003-1-C-00 takes Pulse+Direction control modes.
User-configurable I/O: 9 DI, 5 DO, 1 AI and 2 AO.
598.00 € 598.0 EUR
-
32.15 € 32.15 EUR
-
The EF10-FF10/E10 ball screw end machining is used for EF10-C5 and FF10-C5 floating bearing supports.
This processing is performed on rolled shafts R15-05, R16-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
52.00 € 52.0 EUR
-
34.78 € 34.78 EUR
-
39.53 € 39.53 EUR
-
The EF15-FF15/E10 ball screw end machining is used for EF15-C5 and FF15-C5 floating bearing supports.
This processing is performed on rolled shafts R20-05.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
58.00 € 58.0 EUR
-
50.05 € 50.050000000000004 EUR
-
The EF20-FF20/E10 ball screw end machining is used for EF20-C5 and FF20-C5 floating bearing supports.
This processing is performed on rolled shafts R25-05, R25-10, R25-25.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
60.00 € 60.0 EUR
-
Block EGH15-SA-Z0-H is used in conjunction with the EGR15R4000H profile rail.
The design of the EG series offers a low profile, high load capacity, and high rigidity. It also features an equal load rating in all four directions and self-aligning capability to absorb installation-error, allowing for higher accuracies.
Application: automatic equipment, high speed transfer device, semiconductor
equipment, wood cutting machine, precision measure equipment.
32.47 € 32.47 EUR
-
Block EGH20-CA-Z0-H is used in conjunction with the EGR20R4000H profile rail.
The design of the EG series offers a low profile, high load capacity, and high rigidity. It also features an equal load rating in all four directions and self-aligning capability to absorb installation-error, allowing for higher accuracies.
Application: automatic equipment, high speed transfer device, semiconductor
equipment, wood cutting machine, precision measure equipment.
40.98 € 40.980000000000004 EUR
-
Block EGH25-CA-Z0-H is used in conjunction with the EGR25R4000H profile rail.
The design of the EG series offers a low profile, high load capacity, and high rigidity. It also features an equal load rating in all four directions and self-aligning capability to absorb installation-error, allowing for higher accuracies.
Application: automatic equipment, high speed transfer device, semiconductor
equipment, wood cutting machine, precision measure equipment.
51.17 € 51.17 EUR
-
Block EGH30-CA-Z0-H is used in conjunction with the EGR30R4000H profile rail.
The design of the EG series offers a low profile, high load capacity, and high rigidity. It also features an equal load rating in all four directions and self-aligning capability to absorb installation-error, allowing for higher accuracies.
Application: automatic equipment, high speed transfer device, semiconductor
equipment, wood cutting machine, precision measure equipment.
58.45 € 58.45 EUR
-
Block EGH30-SA-Z0-H is used in conjunction with the EGR30R4000H profile rail.
The design of the EG series offers a low profile, high load capacity, and high rigidity. It also features an equal load rating in all four directions and self-aligning capability to absorb installation-error, allowing for higher accuracies.
Application: automatic equipment, high speed transfer device, semiconductor
equipment, wood cutting machine, precision measure equipment.
53.79 € 53.79 EUR
-
The EGR 15R4000H rail is compatible with EG and QE series blocks.
EGR 15R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic equipment, high speed transfer device, semiconductor equipment, wood cutting machine, precision measure equipment.
311.27 € 311.27 EUR
-
The EGR 20R4000H rail is compatible with EG and QE series blocks.
EGR 20R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic equipment, high speed transfer device, semiconductor equipment, wood cutting machine, precision measure equipment.
347.26 € 347.26 EUR
-
The EGR 25R4000H rail is compatible with EG and QE series blocks.
EGR 25R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic equipment, high speed transfer device, semiconductor equipment, wood cutting machine, precision measure equipment.
391.46 € 391.46000000000004 EUR
-
The EGR 30R4000H rail is compatible with EG and QE series blocks.
EGR 30R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic equipment, high speed transfer device, semiconductor equipment, wood cutting machine, precision measure equipment.
434.30 € 434.3 EUR
-
The EGR 35R4000H rail is compatible with EG and QE series blocks.
EGR 35R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic equipment, high speed transfer device, semiconductor equipment, wood cutting machine, precision measure equipment.
501.59 € 501.59000000000003 EUR
margin: 10 !important;