Skip to Content

Sacom | Shop

Wide Range of Components from World-Class Manufacturers

0205R100C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
100 - Lenght (1000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
144.72 € 144.72 EUR
0205R200C10 Helical rack
Quality 5 / Carbon Steel

02 - Module
05 - Quality
R - Teeth angle (right-hand helical)
200 - Lenght (2000 mm)
C - Material (carbon steel)
1 - Screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 5” are recommended for the following applications:
• High-end machine tools;
• Lifting axis;
• Multi-pinion application.

Analog:
• 246023-Q5 GUDEL;
• CHTGH02010-DIN5 YYC;
302.40 € 302.4 EUR
0208R150C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
150 - Lenght (1500 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02010-DIN8 YYC;
• CHTMQ02010-DIN8 YYC;
92.88 € 92.88 EUR
0208R175C10 Helical rack
Quality 8 / Carbon Steel

02 - Module
08 - Quality
R - Teeth angle (right-hand helical)
175 - Lenght (1750 mm)
C - Material (carbon steel)
1 - screw holes (standard)
0 - Coating (none)

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• 157023 GUDEL;
• CHTM02010-DIN8 YYC;
• CHTMQ02010-DIN8 YYC;
116.64 € 116.64 EUR
1,639.00 € 1639.0 EUR
1J06R050C10 Helical rack
Quality 6 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 6” are recommended for the following applications:
• Machine tools;
• Water-/ laser-/ plasma-cutting machines;
• Portal machine center;
• Tube bending machine;
• Woodworking machine;
• Combination with linear guide.

Analog:
• 246012 GUDEL;
• 246112 GUDEL;
• CHTGH01505-DIN6 YYC;
• MHTG01505-DIN6 YYC;
64.80 € 64.8 EUR
1J08R200C10 Helical rack
Quality 8 / Carbon Steel

APEX Rack and pinion drive systems can replace ball screw drive systems, providing greater travel without adding inertia and higher force capacity. Linear motors can also be replaced by rack and pinion drives to provide lower cost and similar performance in many applications.
High precision machine tools and measuring systems can be designed using rack and pinion drives.

Rack and pinion drive systems with “Quality 8” are recommended for the following applications:
• Welding machine;
• Robots;
• Automatic loading system;
• Linear axis with low load feed.

Analog:
• CHTM01510-DIN8 YYC;
• CHTMQ01510-DIN8 YYC;
116.64 € 116.64 EUR
315.84 € 315.84 EUR
1R16-05B-C7 in mm Rolled Ballscrew Shaft
The ballscrew shaft is manufactured on a custom basis.
When placing an order, the Buyer must specify the required screw length in millimeters (mm).
End machining of shaft can be performed as per the Buyer’s drawing or specifications.
0.06 € 0.06 EUR
136.86 € 136.86 EUR
1R20-05B-C7 in mm Rolled Ballscrew Shaft
The ballscrew shaft is manufactured on a custom basis.
When placing an order, the Buyer must specify the required screw length in millimeters (mm).
End machining of shaft can be performed as per the Buyer’s drawing or specifications.
0.06 € 0.06 EUR
315.84 € 315.84 EUR
378.96 € 378.96 EUR
1R32-05B-C7 in mm Rolled Ballscrew Shaft
The ballscrew shaft is manufactured on a custom basis.
When placing an order, the Buyer must specify the required screw length in millimeters (mm).
End machining of shaft can be performed as per the Buyer’s drawing or specifications.
0.08 € 0.08 EUR
378.96 € 378.96 EUR
378.96 € 378.96 EUR
596.64 € 596.64 EUR
1R50-10F-C7 in mm Rolled Ballscrew Shaft
The ballscrew shaft is manufactured on a custom basis.
When placing an order, the Buyer must specify the required screw length in millimeters (mm).
End machining of shaft can be performed as per the Buyer’s drawing or specifications.
0.13 € 0.13 EUR
22205EAW33 Bearing
Spherical roller bearing, pressed steel cage, groove and lubrication holes on outer ring. With the ULTAGE design, NTN offers as standard, unsurpassed endurance and longevity.
Product analogs:
22205-E1-XL FAG
22205 E SKF
86.72 € 86.72 EUR
22216EAKW33 Bearing
Spherical roller bearing, pressed steel cage, groove and lubrication holes on outer ring. With the ULTAGE design, NTN offers as standard, unsurpassed endurance and longevity.
Product analogs:
22216-E1-XL-K FAG
22216 EK SKF
230.96 € 230.96 EUR
22220EAKW33 Bearing
Spherical roller bearing, pressed steel cage, groove and lubrication holes on outer ring. With the ULTAGE design, NTN offers as standard, unsurpassed endurance and longevity.
Product analogs:
22220-E1-XL-K FAG
22220 EK SKF
414.21 € 414.21 EUR
2ELD2-xx7020B Servo Drive (LEADSHINE)
Leadshine 2ELD2-xx7020B is a dual-axis low-voltage DC servo-drive family for two independent servo axes, rated up to 0.75 kW per axis. Main supply: 24-70 VDC; output capability: 2 x 20 A continuous / 80 A peak per axis. RS variants provide Modbus RTU/pulse control, while CAN variants provide CANopen; STO and direct brake-output functions are available on the 2ELD2 platform. Designed for Leadshine ELVM low-voltage PMSM servo motors in AGVs, mobile robots, logistics equipment and compact multi-axis automation.
From 576.00 € 576.0 EUR
2ELD2-xx7030B Servo Drive (LEADSHINE)
Leadshine 2ELD2-xx7030B is a dual-axis low-voltage DC servo-drive family for two independent servo axes, rated up to 1.2 kW per axis. Main supply: 24-70 VDC; output capability: 2 x 30 A continuous / 90 A peak per axis. RS variants provide Modbus RTU/pulse control, while CAN variants provide CANopen; STO and direct brake-output functions are available on the 2ELD2 platform. Designed for Leadshine ELVM low-voltage PMSM servo motors in AGVs, mobile robots, logistics equipment and compact multi-axis automation.
From 612.00 € 612.0 EUR
43.28 € 43.28 EUR
129.84 € 129.84 EUR
129.84 € 129.84 EUR
129.84 € 129.84 EUR
119.34 € 119.34 EUR
119.34 € 119.34 EUR
119.34 € 119.34 EUR
119.34 € 119.34 EUR
122.82 € 122.82 EUR