Sacom | Shop
Wide Range of Components from World-Class Manufacturers 
Shop_Sacom_LT
Sort By: Name (A-Z)
  • LINEAR GUIDEWAYS
  • BALLSCREWS
  • TRAPEZOIDAL SCREWS AND NUTS
  • AUTOMATION
  • BEARINGS
  • BUSHINGS AND SHAFTS
  • SERVICE
  • RACKS, PINIONS
ATC71-C-ISO30-LN Electrospindle with automatic tool changer
Product analogue: ES929-H6161H0824 HSD, AF110 16/2 CU ISO 30 EV ELTE
Order code: COMTC710009
Speed ​​range: 3000 - 24000 rpm
Power: S1 – 7.5 kW, S6 – 9.0 kW
Voltage: 380V
Tool holder: ISO30 taper with ER 32 nut
Engine type: automatic instrument changer
Processed materials: wood, PVC/plastic, aluminum, composite materials
3,141.60 € 3141.6 EUR
BF25-C5 Bearing support unit
64.81 € 64.81 EUR
BF25-FF25/E10 End machining
The BF25-FF25/E10 ball screw end machining is used for BF25-C5 and FF25-C5 floating bearing supports.
This processing is performed on rolled shafts R32-05, R32-10, R32-32.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
64.00 € 64.0 EUR
BF30-C5 Bearing support unit
77.96 € 77.96000000000001 EUR
BF30-FF30/E10 End machining
The BF30-FF30/E10 ball screw end machining is used for BF30-C5 and FF30-C5 floating bearing supports.
This processing is performed on rolled shafts R40-05, R40-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
70.00 € 70.0 EUR
BF40-C5 Bearing support unit
114.86 € 114.86 EUR
BF40/E10 End machining
The BF40/E10 ball screw end machining is used for BF40-C5 floating bearing supports.
This processing is performed on rolled shafts R50-10, R50-20.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
88.00 € 88.0 EUR
BK25-C5 Bearing fixed unit
167.54 € 167.54 EUR
BK25/E9 End machining
The BK25/E9 ball screw end machining is used for BK25-C5 floating bearing supports.
This processing is performed on rolled shafts R32-05, R32-10, R32-32.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
140.00 € 140.0 EUR
BK25/E91 End machining
The BK25/E91 ball screw end machining is used for BK25-C5 floating bearing supports.
This processing is performed on rolled shafts R32-05, R32-10, R32-32.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
128.00 € 128.0 EUR
BK30-C5 Bearing fixed unit
197.03 € 197.03 EUR
BK30/E9 End machining
The BK30/E9 ball screw end machining is used for BK30-C5 floating bearing supports.
This processing is performed on rolled shafts R40-05, R40-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
156.00 € 156.0 EUR
BK30/E91 End machining
The BK30/E91 ball screw end machining is used for BK30-C5 floating bearing supports.
This processing is performed on rolled shafts R40-05, R40-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
142.00 € 142.0 EUR
BK40-C5 Bearing fixed unit
302.93 € 302.93 EUR
BK40/E9 End machining
The BK40/E9 ball screw end machining is used for BK40-C5 floating bearing supports.
This processing is performed on rolled shafts R50-10, R50-20.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
194.00 € 194.0 EUR
BK40/E91 End machining
The BK40/E91 ball screw end machining is used for BK40-C5 floating bearing supports.
This processing is performed on rolled shafts R50-10, R50-20.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.
176.00 € 176.0 EUR
C35-C-SB-HSK25R-0.4KW-400V-200HZ-11180RPM Motor HF
Product analog: 4-075-01-0812 HOMAG
Order code: COMC0350080
Speed range: 8000 - 12000 rpm,
Toolholder: HSK25R,
Power: 0.4 kW,
Type of cooling: Fan on shaft
Motor type: manual tool changer
Processed material: Wood, PVC/plastic, Aluminum, Composites
816.00 € 816.0 EUR
C35-C-SB-HSK25R-0.4KW-400V-200HZ-11180RPM Motor HF
Product analog: 4-075-01-0135 PERSKE
Order code: COMC0350096
Speed range: 8000 - 12000 rpm,
Toolholder: HSK25R,
Power: 0.4 kW,
Type of cooling: Fan on shaft
Motor type: manual tool changer
Processed material: Wood, PVC/plastic, Aluminum, Composites
832.32 € 832.32 EUR
C35-C-SB-HSK25R-0.4KW-400V-200HZ-11180RPM Motor HF
Order code: COMC0350134
Speed range: 8000 - 12000 rpm,
Toolholder: HSK25R,
Power: 0.4 kW,
Type of cooling: Fan on shaft
Motor type: manual tool changer
Processed material: Wood, PVC/plastic, Aluminum, Composites
748.00 € 748.0 EUR
CABLE-BMAH5M0-124-TS Cable
Leadshine CABLE-BMAH5M0-124-TS absolute encoder cable for servo systems.
CABLE-BMAH5M0-124-TS is for ELM1/2 series motors and EL6/EL7/EL8 series drivers.
Leadshine CABLE-BMAH5M0-124-TS is for connect an absolute servo motor encoder.
5.0 meters (16.4 foots) long.
60.00 € 60.0 EUR
CABLE-PC Cable
Leadshine CABLE-PC cable for tuning stepper systems.
CABLE-PC cable for communication cable to DM/EM series stepper drivers.
RS232.
1.2 meters (3.9 foots) long.
2.23 € 2.23 EUR
CABLE-PC-1 Cable
Leadshine CABLE-PC-1 cable for tuning stepper and servo systems.
RS232.
1.2 meters (3.9 foots) long.
2.23 € 2.23 EUR
CABLE-RZH5M0-114-TS Cable
Leadshine CABLE-RZH5M0-114-TS power cable for servo systems.
CABLE-RZH5M0-114-TS is for ELM1/2 series motors without brake and EL6/EL7/EL8 series drivers.
5.0 meters (16.4 foots) long.
36.00 € 36.0 EUR
CABLE-RZSH5M0-114-TS Cable
Leadshine CABLE-RZSH5M0-114-TS power cable for servo systems.
CABLE-RZSH5M0-114-TS is for ELM1/2 series motors with Brake and EL6/EL7/EL8 series drivers.
5.0 meters (16.4 foots) long.
48.00 € 48.0 EUR
CABLE-TYPEC2M0 Cable
Leadshine CABLE-TYPEC2M0 cable for tuning servo systems.
CABLE-TYPEC2M0 cable for communication cable to EL7 and EL8 series servo drivers.
2 meters (6.6 foots) long.
6.72 € 6.72 EUR
CABLEH-BM10M0 Cable
Leadshine CABLEH-BM10M0 encoder cable for CS-M/CS-D series closed loop stepper systems.
10.0 meters (32.8 foots) long.
31.20 € 31.2 EUR
CABLEH-BM3M0 Cable
Leadshine CABLEH-BM3M0 encoder cable for CS-M/CS-D series closed loop stepper systems.
3.0 meters (9.8 foots) long.
12.00 € 12.0 EUR
CABLEH-RZ10M0 Cable
Leadshine CABLEH-RZ10M0 power cable for CS-M/CS-D series closed loop stepper systems.
10.0 meters (32.8 foots) long.
36.00 € 36.0 EUR
CABLEH-RZ3M0 Cable
Leadshine CABLEH-RZ3M0 power cable for CS-M/CS-D series closed loop stepper systems.
3.0 meters (9.8 foots) long.
12.00 € 12.0 EUR
CG-15-EJM-KIT Metal end jig
Metal end clamp of the protective cover strip on the guide HIWIN CG30-EJM-KIT. For guides of the CG series, size 15.
2.78 € 2.7800000000000002 EUR
CG-25-EJM-KIT Metal end jig
Metal end clamp of the protective cover strip on the guide HIWIN CG30-EJM-KIT. For guides of the CG series, size 25.
7.77 € 7.7700000000000005 EUR
CG-30-EJM-KIT Metal end jig
Metal end clamp of the protective cover strip on the guide HIWIN CG30-EJM-KIT. For guides of the CG series, size 30.
9.10 € 9.1 EUR
margin: 10 !important;