WV38-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
R1000 038 00 (Rexroth)

Diameter: 38 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

LJM40-3000 - SKF
SN40-3000 - NB
WB40-3000 - INA
1000-040-00 - Rexroth
• Steel grade CF53 shaft (surface treatment and chamfering is
possible)
• Induction hardened and ground linear shaft
• Shaft processing according to customer drawings

WV40-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
R1000 040 00 (Rexroth)
LJM 40 (Ewellix)
W 40 (FLI)
W40 (INA)

Diameter: 40 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

WV45-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
R1000 045 00 (Rexroth)
W 45 (FLI)

Diameter: 45 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

LJM50-3000 - SKF
SN50-3000 - NB
WB50-3000 - INA
1000-050-00 - Rexroth
• Steel grade CF53 shaft (surface treatment and chamfering is
possible)
• Induction hardened and ground linear shaft
• Shaft processing according to customer drawings

WV50-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
R1000 050 00 (Rexroth)
LJM 50 (Ewellix)
W 50 (FLI)
W50 (INA)

Diameter: 50 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features: - Cut to length - Axial threading - Radial threading - End milling - V-groove cutting - Circlip groove cutting - Thread cutting - Parallel end milling - Per customer blueprints.

WV55-4000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
R1000 055 00 (Rexroth)
W 55 (FLI)

Diameter: 55 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

LJM60-3000 - SKF
SN60-3000 - NB
WB60-3000 - INA
1000-010-00 - Rexroth
• Steel grade CF53 shaft (surface treatment and chamfering is
possible)
• Induction hardened and ground linear shaft
• Shaft processing according to customer drawings

WV60-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
R1000 060 00 (Rexroth)
LJM 60 (Ewellix)
W 60 (FLI)
W60 (INA)

Diameter: 60 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

WV65-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Diameter: 65 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

WV70-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
R1000 070 00 (Rexroth)
W 70 (FLI)

Diameter: 70 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

WV75-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Diameter: 75 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

WV80-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
R1000 080 00 (Rexroth)
LJM 80 (Ewellix)
W 80 (FLI)
W80 (INA)

Diameter: 80 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

WV90-6000-h6-C45 - precision linear chrome-alloyed shaft with shaft blocks.

Cross References:
W 90 (FLI)

Diameter: 90 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.
Material options: AISI 304, AISI 440, GCr15, C53, C60, X40Cr14,100Cr6, X90CrMoV18.
Machining features:
- Cut to length
- Axial threading
- Radial threading
- End milling
- V-groove cutting
- Circlip groove cutting
- Thread cutting
- Parallel end milling
- Per customer blueprints.

Double end seal with scraper allows the use of HIWIN linear guides in dirty and dusty environment including hot chips and abrasive particles. The scraper protects the end seals and prevents their damage. Designation of the seal RG55-KK-KIT: RG55 – seal for the RG series profile rail guide size 55 (wide design rolling guide with ball rolling elements); KK – for carriages with double end seal and scraper; KIT – fastening elements kit (for both ends).

Metal scraper allows the use of HIWIN linear guides in dirty and dusty environment including hot chips and abrasive particles. The scraper protects the end seals and prevents their damage. Designation of the seal WE35-ZZ-KIT: WE35 – scraper for the HG series profile rail guide size 35 (high load capacity rolling guide with ball rolling elements); ZZ – carriage with metal scraper; KIT – fastening elements kit (for both ends).

Block WEH27-CAE-Z0-C is used in conjunction with the WER27R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEH27-CA-Z0-H is used in conjunction with the WER27R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEH27-CA-ZA-H is used in conjunction with the WER27R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEH35-CA-Z0-H is used in conjunction with the WER35R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

The WER 27R4000H rail is compatible with WE and QE series blocks.
WER 27R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

The WER 35R4000H rail is compatible with WE and QE series blocks.
WER 35R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

The WER 35T4000H rail is compatible with WE and QE series blocks.
WER 35T rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEW17-CC-ZA-H is used in conjunction with the WER17R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEW27-CC-Z0-H is used in conjunction with the WER27R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEW35-CC-Z0-H is used in conjunction with the WER35R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Product analogs:
305263D (SKF)
DE4019 (NTN)

Product analog:
DE3213 (NTN)

Leadshine iCS-1703 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.3 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-1706 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.6 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-1708 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.8 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-2313 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 23 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 1.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.