Stepper systems
  1. Products
  2. AUTOMATION
  3. Stepper systems
Shop_Sacom_LT
Sort By: Name (A-Z)
Stepper systems
  • Stepper systems
  • Servo systems
  • Spindles and motors
  • Frequency converters

-
42CM08-1A Motor
Leadshine 42CM08-1A NEMA 17 stepper motor.
Holding torque 0.8 Nm.
Current 1.50 A.
60 mm (2.36 inch) long.
5 mm (0.197 inch) shaft size.
17.60 € 17.6 EUR
-
CABLE-PC Cable
Leadshine CABLE-PC cable for tuning stepper systems.
CABLE-PC cable for communication cable to DM/EM series stepper drivers.
RS232.
1.2 meters (3.9 foots) long.
2.05 € 2.05 EUR
-
CABLE-PC-1 Cable
Leadshine CABLE-PC-1 cable for tuning stepper and servo systems.
RS232.
1.2 meters (3.9 foots) long.
2.05 € 2.05 EUR
-
CABLEH-BM10M0 Cable
Leadshine CABLEH-BM10M0 encoder cable for CS-M/CS-D series closed loop stepper systems.
10.0 meters (32.8 foots) long.
28.60 € 28.6 EUR
-
CABLEH-BM3M0 Cable
Leadshine CABLEH-BM3M0 encoder cable for CS-M/CS-D series closed loop stepper systems.
3.0 meters (9.8 foots) long.
11.00 € 11.0 EUR
-
CABLEH-RZ10M0 Cable
Leadshine CABLEH-RZ10M0 power cable for CS-M/CS-D series closed loop stepper systems.
10.0 meters (32.8 foots) long.
33.00 € 33.0 EUR
-
CABLEH-RZ3M0 Cable
Leadshine CABLEH-RZ3M0 power cable for CS-M/CS-D series closed loop stepper systems.
3.0 meters (9.8 foots) long.
11.00 € 11.0 EUR
-
CS-D508 Driver
Leadshine CS-D508 closed loop stepper driver.
Input voltage of 20 - 50 VDC.
Output current of 0.50 - 8.00 A.
CS-D508 takes step & direction (PUL/DIR) or CW/CCW control modes. Closed loop stepper driver Leadshine CS-D508 is easy to setup and configure via DIP switches.
83.60 € 83.60000000000001 EUR
-
CS-D808 Driver
Leadshine CS-D808 closed loop stepper driver.
Input voltage of 20 - 80 VDC.
Output current of 0.50 - 8.00 A.
CS-D808 takes step & direction (PUL/DIR) or CW/CCW control modes. Closed loop stepper driver Leadshine CS-D808 is easy to setup and configure via DIP switches.
107.80 € 107.8 EUR
-
CS-M22313 Motor
Leadshine CS-M22313 NEMA 23 closed loop stepper motor.
Holding torque 1.3 Nm.
Current 4.00 A.
75 mm (2.95 inch) long.
8 mm (0.315 inch) shaft size.
Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder.
63.80 € 63.800000000000004 EUR
-
CS-M22323 Motor
Leadshine CS-M22323 NEMA 23 closed loop stepper motor.
Holding torque 2.3 Nm.
Current 5.00 A.
96 mm (3.78 inch) long.
8 mm (0.315 inch) shaft size.
Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder.
63.80 € 63.800000000000004 EUR
-
CS-M23485 Motor
Leadshine CS-M23485 NEMA 34 closed loop stepper motor.
Holding torque 8.5 Nm.
Current 6.00 A.
147 mm (5.79 inch) long.
14 mm (0.551 inch) shaft size.
Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder.
132.00 € 132.0 EUR
-
D57CM31-4A Motor
Leadshine D57CM31-4A NEMA 23 stepper motor.
Holding torque 3.1 Nm.
Current 4 A.
88 mm (3.46 inch) long.
8 mm (0.315 inch) shaft size.
33.00 € 33.0 EUR
-
DM432C Driver
Leadshine DM432C stepper driver.
Input voltage of 18 - 40 VDC.
Output current of 0.10 - 3.20 A.
DM432C takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine DM432C is easy to setup and configure via DIP switches.
55.00 € 55.0 EUR
-
DM556E Driver
Leadshine DM556E stepper driver.
Input voltage of 18 - 50 VDC.
Output current of 1.80 - 5.60 A.
DM556E takes step & direction (PUL/DIR) control. Stepper driver Leadshine DM556E is easy to setup and configure via DIP switches.
48.40 € 48.4 EUR
-
DM860E Driver
Leadshine DM860E. 2-phase and 4-phase stepper driver.
Input voltage of 24 - 74 VDC.
Output current of 2.40 - 7.20 A.
DM860E takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine DM860E is easy to setup and configure via DIP switches.
66.00 € 66.0 EUR
-
EM532-MINI Drive
Leadshine EM532-MINI stepper driver.
Input voltage of 18 - 50 VDC.
Output current of 0.40 - 3.20 A.
EM532-MINI takes step & direction (PUL/DIR). Stepper driver Leadshine EM532-MINI is easy to setup and configure via DIP switches.
46.20 € 46.2 EUR
-
EM556S Drive
Leadshine EM556S stepper driver.
Input voltage of 20 - 50 VDC.
Output current of 0.50 - 5.60 A.
EM556S takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine EM556S is easy to setup and configure via DIP switches.
83.60 € 83.60000000000001 EUR
-
EM705 Driver
Leadshine EM705 stepper driver.
Input voltage of 20 - 70 VDC.
Output current of 0.50 - 7.00 A.
EM705 takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine EM705 is easy to setup and configure via DIP switches.
85.36 € 85.36 EUR
-
EM806 Driver
Leadshine EM806 stepper driver.
Input voltage of 24 - 80 VDC.
Output current of 0.50 - 8.20 A.
EM806 takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine EM806 is easy to setup and configure via DIP switches.
102.96 € 102.96000000000001 EUR
-
FL39ST38-0504B-5 Stepper motor
Fulling Motor FL39ST38-0504B-5 NEMA 16 stepper motor.
Holding torque 0.29 Nm.
Current 0.50 A.
38 mm (1.5 inch) long.
5 mm (0.197 inch) shaft size.
21.60 € 21.6 EUR
-
M860 Drive
Leadshine M860 stepper driver.
Input voltage of 24 - 80 VDC.
Output current of 1.80 - 7.20 A.
M860 takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine M860 is easy to setup and configure via DIP switches.
90.86 € 90.86 EUR
-
iCS-1703 Motor
Leadshine iCS-1703 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.3 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
101.20 € 101.2 EUR
-
iCS-1706 Motor
Leadshine iCS-1706 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.6 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
81.40 € 81.4 EUR
-
iCS-1708 Motor
Leadshine iCS-1708 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.8 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
88.00 € 88.0 EUR
-
iCS-2323 Motor
Leadshine iCS-2323 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 23 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 2.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
101.20 € 101.2 EUR
-
iCS-2331-L Motor
Leadshine iCS-2331-L is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 23 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.1 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
112.20 € 112.2 EUR
-
iCS-2430 Motor
Leadshine iCS-2430 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 24 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA24 (60 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.0 Nm
User-configurable I/O: 3 DI, 1 DO
Built-in protections: over-voltage, over-current and position-error.
112.20 € 112.2 EUR
-
iCS-2435 Motor
Leadshine iCS-2435 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 24 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA24 (60 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.5 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
121.00 € 121.0 EUR
-
iCS-RS1706 Motor
Leadshine iCS-RS1706 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA 17 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA17 (42.0 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–36 VDC.
Holding torque: 0.6 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
99.00 € 99.0 EUR
-
iCS-RS1708 Motor
Leadshine iCS-RS1708 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA 17 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA17 (42.0 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–36 VDC.
Holding torque: 0.8 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
103.40 € 103.4 EUR
-
iCS-RS2313 Motor
Leadshine iCS-RS2313 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA23 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA23 (57.2 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–50 VDC.
Holding torque: 1.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
110.00 € 110.0 EUR
margin: 10 !important;