Sacom | Shop
Wide Range of Components from World-Class Manufacturers 

            
            
  • LINEAR GUIDEWAYS
  • BALLSCREWS
  • TRAPEZOIDAL SCREWS AND NUTS
  • AUTOMATION
  • BEARINGS
  • BUSHINGS AND SHAFTS
  • SERVICE
  • RACKS, PINIONS
-
KN12 - INA
R067001200 - Rexroth
LBCD12 - SKF
Self-Aligning Linear Bushing LMES 12 UU
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
8.96 € 8.96 EUR
-
KN16 - INA
R067001600 - Rexroth
LBCD16 - SKF
Self-Aligning Linear Bushing LMES 16 UU
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
9.38 € 9.38 EUR
-
KN20 - INA
R067002000 - Rexroth
LBCD20 - SKF
Self-Aligning Linear Bushing LMES 20 UU
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
11.86 € 11.86 EUR
-
KN25 - INA
R067002500 - Rexroth
LBCD25 - SKF
Self-Aligning Linear Bushing LMES 25 UU
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
15.60 € 15.6 EUR
-
KNO25-PP - INA
R067122540 - Rexroth
LBCF25-2LS - SKF
Self-Aligning Linear Bushing LMES 25 UUOP
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
18.60 € 18.6 EUR
-
KN30 - INA
R067003000 - Rexroth
LBCD30 - SKF
Self-Aligning Linear Bushing LMES 30 UU
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
21.06 € 21.06 EUR
-
KNO30-PP - INA
R067123040 - Rexroth
LBCF30-2LS - SKF
Self-Aligning Linear Bushing LME S30 UUOP
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
23.22 € 23.22 EUR
-
KNO40-PP - INA
R067124040 - Rexroth
LBCF40-2LS - SKF
Self-Aligning Linear Bushing LMES 40 UUOP
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
33.20 € 33.2 EUR
-
KN50 - INA
R067005000 - Rexroth
LBCD50 - SKF
Self-Aligning Linear Bushing LMES 50 UU
• High load Capacity and long travel life
• Interchangeable with Standard linear bushing on European&American Type
• Travel speeds up to 10ft/s (3m/s) and smooth operation
• Easy of installation as a result of self-aligning Ball plates (±0.5˚)
• Anti-Rusting: Nickel or Chrome Plating, Raydent Treatment of ball plate, Stainless-steel ball.
36.00 € 36.0 EUR
-
LMH16UU - THK
SMT16GUU - NB
LHZC16 - MISUMI
SUS SERIES-Flanged Linear Bushing LMH 16 UU
• Outer-sleeve, ball and flange : used stainless steel. corrosion resistance
products
• With a variety of design and ease of installation
• Used when the load of moving body passed directly to the Linear
Bushing
• Installed without housing
• Can be selected resin retainer (standard), and steel retainer (for high
temperature & vacuum)
11.36 € 11.36 EUR
-
LMK16LUU - THK
SMK16GWUU - NB
LHFSW16 - MISUMI
SUS SERIES-Flanged Linear Bushing LMK 16 LUU
• Outer-sleeve, ball and flange : used stainless steel. corrosion resistance
products
• With a variety of design and ease of installation
• Used when the load of moving body passed directly to the Linear
Bushing
• Installed without housing
• Can be selected resin retainer (standard), and steel retainer (for high
temperature & vacuum)
21.52 € 21.52 EUR
-
51.94 € 51.94 EUR
-
10.68 € 10.68 EUR
-
Bearing inserts for bearing units, are proposed with different locking devices for easy assembly.
Product analogs:
INA GAY17-XL-NPP-B
SKF YAT 203
SNR US203G2
5.48 € 5.48 EUR
-
Bearing inserts for bearing units, are proposed with different locking devices for easy assembly.
Product analogs:
INA GAY25-XL-NPP-B
SKF YAT 205
SNR US205G2
6.47 € 6.47 EUR
-
Bearing inserts for bearing units, are proposed with different locking devices for easy assembly.
Product analogs:
INA GAY30-XL-NPP-B
SKF YAT 206
SNR US206G2
7.88 € 7.88 EUR
-
Bearing inserts for bearing units, are proposed with different locking devices for easy assembly.
Product analogs:
INA GAY35-XL-NPP-B
SKF YAT 207
SNR US207G2
8.77 € 8.77 EUR
-
Connector Set, Power and Signal Connectors for spindle ATC71 serias
71.40 € 71.4 EUR
-
Leadshine M860 stepper driver.
Input voltage of 24 - 80 VDC.
Output current of 1.80 - 7.20 A.
M860 takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine M860 is easy to setup and configure via DIP switches.
99.12 € 99.12 EUR
-
364.80 € 364.8 EUR
-
Block MGN07-CZ-0H-M is used in conjunction with the MGNR07R600HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.
23.61 € 23.61 EUR
-
Block MGN07-HZ-0H-M is used in conjunction with the MGNR07R600HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.
25.48 € 25.48 EUR
-
Block MGN09-CZ-1H-MEL is used in conjunction with the MGNR09R1200HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.
31.02 € 31.02 EUR
-
Block MGN12-CZ-0H-M is used in conjunction with the MGNR12R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.
26.39 € 26.39 EUR
-
Block MGN12-HZ-0H-M is used in conjunction with the MGNR12R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.
29.64 € 29.64 EUR
-
Block MGN15-CZ-0H-M is used in conjunction with the MGNR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.
30.06 € 30.060000000000002 EUR
-
Block MGN15-HZ-0H-M is used in conjunction with the MGNR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.
34.92 € 34.92 EUR
-
The MGNR 07R600HM rail is compatible with MGN series blocks.
MGNR 07R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.
63.96 € 63.96 EUR
-
The MGNR 09R1200HM rail is compatible with MGN series blocks.
MGNR 09R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.
131.66 € 131.66 EUR
-
The MGNR 12R2000HM rail is compatible with MGN series blocks.
MGNR 12R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.
232.96 € 232.96 EUR
-
The MGNR 15R2000HM rail is compatible with MGN series blocks.
MGNR 15R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.
274.56 € 274.56 EUR
margin: 10 !important;