Blocks

Block MGN15-HZ-0H-M is used in conjunction with the MGNR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW09-CZ-0H-M is used in conjunction with the MGWR09R1200HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW09-HZ-0H-M is used in conjunction with the MGWR09R1200HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW12-CZ-0H-M is used in conjunction with the MGWR12R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW15-CZ-0H-M is used in conjunction with the MGWR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW15-HZ-0H-M is used in conjunction with the MGWR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

MSA15E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW15CAZAH / HGW15CAZ0H (HIWIN)
TRH15FNNZ0 (TBI)
SBI15FLNK2 / SBI15FLNK0 (SBC)
R165111420 / R165119320 (Rexroth)
HSR15ASSH (THK)
LLRHC15AT1P3 (Ewellix)
HRC15FNV2H / HRC15FNV1H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA15S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH15CAZAH / HGH15CAZ0H (HIWIN)
TRH15VNNZ0 (TBI)
SBI15SLK2 (SBC)
R162211420 (Rexroth)
HSR15CRSSH (THK)
LLRHC15UT1P3 (Ewellix)
HRC15MNV2H / HRC15MNV1H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA20E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW20CAZAH / HGW20CAZBH / HGW20CAZ0H (HIWIN)
TRH20FNNZ0 (TBI)
SBI20FLNK2 / SBI20FLNK3 / SBI20FLNK1 (SBC)
R165181320 (Rexroth)
HSR20ASSH / HSR20ASSC1H (THK)
LLRHC20AT2P3 (Ewellix)
HRC20FNV2H / HRC20FNV3H / HRC20FNV1H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA20LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW20HAZAH / HGW20HAZBH / HGW20HAZ0H (HIWIN)
TRH20FENZ0 (TBI)
SBI20FLLNK2 / SBI20FLLNK3 / SBI20FLLNK1 (SBC)
R165381320 / R165382320 / R165389320 (Rexroth)
HSR20HASSH / HSR20HASSС0H (THK)
LLRHC20LAT1P3 (Ewellix)
HRC20FLV2H / HRC20FLV3H / HRC20FLV1H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA20LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH20HAZAH / HGH20HAZBH / HGH20HAZ0H (HIWIN)
TRH20VENZ0 (TBI)
SBI20SLLNK1 / SBI20SLLNK3 / SBI20SLLNK1 (SBC)
R165382320 / R165321420 / R165382320 (Rexroth)
HSR20HRASSH / HSR20HRSSC0H / HSR20LASSH (THK)
LLRHC20LUT2P3 / LLRHC20LUT0P3 (Ewellix)
HRC20FLV2H / HRC20FLV2H / HRC20MLV1H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA20S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH20CAZAH / HGH20CAZBH / HGH20CAZ0H (HIWIN)
TRH20VNNZ0 (TBI)
SBI20SLK2 / SBI20SLK3 / SBI20SLK1 (SBC)
R162281320 / R162289320 (Rexroth)
HSR20CRSSH / HSR20CRSSC0H / HSR20RSSH (THK)
LLRHC20UT1P3 / LLRHC20UT2P3 / LLRHC20UT0P3 (Ewellix)
HRC20MNV1H / HRC20MNV3H / HRC20MNV1H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA25E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW25CAZAH (HIWIN)
TRH25FNNZ0 (TBI)
SBI25FLNK2 (SBC)
R165121320 (Rexroth)
HSR25ASSH (THK)
LLRHC25AT1P3 (Ewellix)
HRC25FNV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA25LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW25HAZAH (HIWIN)
TRH25FENZ0 (TBI)
SBI25FLLNK2 (SBC)
R165321320 (Rexroth)
HSR25HASSH (THK)
LLRHC25LAT1P3 (Ewellix)
HRC25FLV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA25LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH25HAZAH (HIWIN)
TRH25VENZ0 (TBI)
SBI25SLLNK1 (SBC)
R165382320 (Rexroth)
HSR25HRSSH (THK)
LLRHC25LUT1P3 (Ewellix)
HRC25MLV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA25S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH25CAZAH (HIWIN);
TRH25VNNZ0 (TBI);
SBI25SLK2 (SBC);
R162221325 (Rexroth);
HSR25RSSC1H (THK);
LLRHC25UT1P3 (Ewellix);
HRC25MNV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30CAZAH (HIWIN)
TRH30FNNZ0 (TBI)
SBI30FLNK2 (SBC)
R165171320 (Rexroth)
HSR30ASSC1H (THK)
LLRHC30AT1P3 (Ewellix)
HRC30FNV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30HAZAH (HIWIN)
TRH30FENZ0 (TBI)
SBI30FLLNK2 (SBC)
R165371320 (Rexroth)
HSR30HASSH (THK)
LLRHC30LAT1P3 (Ewellix)
HRC30FLV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30HAZAH (HIWIN)
TRH30VENZ0 (TBI)
SBI30SLLNK1 (SBC)
R162371330 (Rexroth)
HSR30HRSSH (THK)
LLRHC30LUT2P3 (Ewellix)
HRC30FLV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZAH (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK2 (SBC)
R162271320 (Rexroth)
HSR30CRSSC1H(THK)
LLRHC30UT1P3 (Ewellix)
HRC30MNV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW35CAZAH (HIWIN)
TRH35FNNZ0 (TBI)
SBI35FLNK2 (SBC)
R165131320 (Rexroth)
HSR35ASSC1H (THK)
LLRHC35AT1P3 (Ewellix)
HRC35FNV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW35HAZAH (HIWIN)
TRH35FENZ0 (TBI)
SBI35FLLNK2 (SBC)
R165331320 (Rexroth)
HSR35HASSH (THK)
LLRHC35LAT0P3 (Ewellix)
HRC35FLV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH35HAZAH (HIWIN)
TRH35VENZ0 (TBI)
SBI35SLLNK1 (SBC)
R165382320 (Rexroth)
HSR35HRSSH (THK)
LLRHC35LUT0P3 (Ewellix)
HRC35MLV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH35CAZAH (HIWIN)
TRH35VNNZ0 (TBI)
SBI35SLK2 (SBC)
R162231320 (Rexroth)
HSR35CRSSC1H(THK)
LLRHC35UT0P3 (Ewellix)
HRC35MNV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA45E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW45CAZAH (HIWIN)
TRH45VNNZ0 (TBI)
SBI45FLNK2 (SBC)
R165141320 (Rexroth)
HSR45ASSC1H (THK)
LLRHC45AT1P3 (Ewellix)
HRC45FNV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA45LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW45HAZAH (HIWIN)
TRH45FENZ0 (TBI)
SBI45FLLNK2 (SBC)
R165341320 (Rexroth)
HSR45HASSH (THK)
LLRHC45LAT1P3 (Ewellix)
HRC45FLV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA45LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH45HAZAH (HIWIN)
TRH45VENZ0 (TBI)
SBI45SLLNK2 (SBC)
R165382320 (Rexroth)
HSR45HRSSH (THK)
LLRHC45LUT1P3 (Ewellix)
HRC45MLV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA45S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH45CAZAH (HIWIN)
TRH45VNNZ0 (TBI)
SBI45SLK2 (SBC)
R162231320 (Rexroth)
HSR45CRSSC1H (THK)
LLRHC45UT1P3 (Ewellix)
HRC45MNV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA55E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW55CAZAH (HIWIN)
TRH55FNNZ0 (TBI)
SBI55FLNK2 (SBC)
R165151320 (Rexroth)
HSR55ASSC1H (THK)
LLRHC55AT1P3 (Ewellix)
HRC55FNV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA55LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW55HAZAH (HIWIN)
TRH55FENZ0 (TBI)
SBI55FLLNK2 (SBC)
R165351310 (Rexroth)
HSR55HASSH (THK)
LLRHC55LAT1P3 (Ewellix)
HRC55FLV2H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA55LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH55HAZAH (HIWIN)
TRH55VENZ0 (TBI)
SBI55SLLNK1 (SBC)
R162351310 (Rexroth)
HSR55HRSSH (THK)
LLRHC55LUT1P3 (Ewellix)
HRC55MLV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA55S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH55CAZAH (HIWIN)
TRH55VNNZ0 (TBI)
SBI55SLK2 (SBC)
R162251310 (Rexroth)
HSR55CRSSC1H (THK)
LLRHC55UT1P3 (Ewellix)
HRC55MLV2H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.