Stepper systems
  1. Products
  2. AUTOMATION
  3. Stepper systems
Shop_Sacom_LT
Sort By: Name (A-Z)
Stepper systems
  • Stepper systems
  • Servo systems
  • Spindles and motors
  • Frequency converters

-
42CM08-1A Motor
Leadshine 42CM08-1A NEMA 17 stepper motor.
Holding torque 0.8 Nm.
Current 1.50 A.
60 mm (2.36 inch) long.
5 mm (0.197 inch) shaft size.
17.60 € 17.6 EUR
-
CABLE-PC Cable
Leadshine CABLE-PC cable for tuning stepper systems.
CABLE-PC cable for communication cable to DM/EM series stepper drivers.
RS232.
1.2 meters (3.9 foots) long.
2.05 € 2.05 EUR
-
CABLE-PC-1 Cable
Leadshine CABLE-PC-1 cable for tuning stepper and servo systems.
RS232.
1.2 meters (3.9 foots) long.
2.05 € 2.05 EUR
-
CABLEH-BM10M0 Cable
Leadshine CABLEH-BM10M0 encoder cable for CS-M/CS-D series closed loop stepper systems.
10.0 meters (32.8 foots) long.
28.60 € 28.6 EUR
-
CABLEH-BM3M0 Cable
Leadshine CABLEH-BM3M0 encoder cable for CS-M/CS-D series closed loop stepper systems.
3.0 meters (9.8 foots) long.
11.00 € 11.0 EUR
-
CABLEH-RZ10M0 Cable
Leadshine CABLEH-RZ10M0 power cable for CS-M/CS-D series closed loop stepper systems.
10.0 meters (32.8 foots) long.
33.00 € 33.0 EUR
-
CABLEH-RZ3M0 Cable
Leadshine CABLEH-RZ3M0 power cable for CS-M/CS-D series closed loop stepper systems.
3.0 meters (9.8 foots) long.
11.00 € 11.0 EUR
-
CS-D508 Driver
Leadshine CS-D508 closed loop stepper driver.
Input voltage of 20 - 50 VDC.
Output current of 0.50 - 8.00 A.
CS-D508 takes step & direction (PUL/DIR) or CW/CCW control modes. Closed loop stepper driver Leadshine CS-D508 is easy to setup and configure via DIP switches.
83.60 € 83.60000000000001 EUR
-
CS-D808 Driver
Leadshine CS-D808 closed loop stepper driver.
Input voltage of 20 - 80 VDC.
Output current of 0.50 - 8.00 A.
CS-D808 takes step & direction (PUL/DIR) or CW/CCW control modes. Closed loop stepper driver Leadshine CS-D808 is easy to setup and configure via DIP switches.
107.80 € 107.8 EUR
-
CS-M22313 Motor
Leadshine CS-M22313 NEMA 23 closed loop stepper motor.
Holding torque 1.3 Nm.
Current 4.00 A.
75 mm (2.95 inch) long.
8 mm (0.315 inch) shaft size.
Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder.
63.80 € 63.800000000000004 EUR
-
CS-M22323 Motor
Leadshine CS-M22323 NEMA 23 closed loop stepper motor.
Holding torque 2.3 Nm.
Current 5.00 A.
96 mm (3.78 inch) long.
8 mm (0.315 inch) shaft size.
Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder.
63.80 € 63.800000000000004 EUR
-
CS-M23485 Motor
Leadshine CS-M23485 NEMA 34 closed loop stepper motor.
Holding torque 8.5 Nm.
Current 6.00 A.
147 mm (5.79 inch) long.
14 mm (0.551 inch) shaft size.
Integrated 1,000 line (4,000 count/revolution) quadrature rotary encoder.
132.00 € 132.0 EUR
-
D57CM31-4A Motor
Leadshine D57CM31-4A NEMA 23 stepper motor.
Holding torque 3.1 Nm.
Current 4 A.
88 mm (3.46 inch) long.
8 mm (0.315 inch) shaft size.
33.00 € 33.0 EUR
-
DM432C Driver
Leadshine DM432C stepper driver.
Input voltage of 18 - 40 VDC.
Output current of 0.10 - 3.20 A.
DM432C takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine DM432C is easy to setup and configure via DIP switches.
55.00 € 55.0 EUR
-
DM556E Driver
Leadshine DM556E stepper driver.
Input voltage of 18 - 50 VDC.
Output current of 1.80 - 5.60 A.
DM556E takes step & direction (PUL/DIR) control. Stepper driver Leadshine DM556E is easy to setup and configure via DIP switches.
48.40 € 48.4 EUR
-
DM860E Driver
Leadshine DM860E. 2-phase and 4-phase stepper driver.
Input voltage of 24 - 74 VDC.
Output current of 2.40 - 7.20 A.
DM860E takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine DM860E is easy to setup and configure via DIP switches.
66.00 € 66.0 EUR
-
EM532-MINI Drive
Leadshine EM532-MINI stepper driver.
Input voltage of 18 - 50 VDC.
Output current of 0.40 - 3.20 A.
EM532-MINI takes step & direction (PUL/DIR). Stepper driver Leadshine EM532-MINI is easy to setup and configure via DIP switches.
46.20 € 46.2 EUR
-
EM556S Drive
Leadshine EM556S stepper driver.
Input voltage of 20 - 50 VDC.
Output current of 0.50 - 5.60 A.
EM556S takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine EM556S is easy to setup and configure via DIP switches.
83.60 € 83.60000000000001 EUR
-
EM705 Driver
Leadshine EM705 stepper driver.
Input voltage of 20 - 70 VDC.
Output current of 0.50 - 7.00 A.
EM705 takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine EM705 is easy to setup and configure via DIP switches.
85.36 € 85.36 EUR
-
EM806 Driver
Leadshine EM806 stepper driver.
Input voltage of 24 - 80 VDC.
Output current of 0.50 - 8.20 A.
EM806 takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine EM806 is easy to setup and configure via DIP switches.
102.96 € 102.96000000000001 EUR
-
FL39ST38-0504B-5 Stepper motor
Fulling Motor FL39ST38-0504B-5 NEMA 16 stepper motor.
Holding torque 0.29 Nm.
Current 0.50 A.
38 mm (1.5 inch) long.
5 mm (0.197 inch) shaft size.
21.60 € 21.6 EUR
-
M860 Drive
Leadshine M860 stepper driver.
Input voltage of 24 - 80 VDC.
Output current of 1.80 - 7.20 A.
M860 takes step & direction (PUL/DIR) or CW/CCW control. Stepper driver Leadshine M860 is easy to setup and configure via DIP switches.
90.86 € 90.86 EUR
-
iCS-1703 Motor
Leadshine iCS-1703 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.3 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
101.20 € 101.2 EUR
-
iCS-1706 Motor
Leadshine iCS-1706 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.6 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
81.40 € 81.4 EUR
-
iCS-1708 Motor
Leadshine iCS-1708 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.8 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
88.00 € 88.0 EUR
-
iCS-2323 Motor
Leadshine iCS-2323 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 23 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 2.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
101.20 € 101.2 EUR
-
iCS-2331-L Motor
Leadshine iCS-2331-L is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 23 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.1 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
112.20 € 112.2 EUR
-
iCS-2430 Motor
Leadshine iCS-2430 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 24 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA24 (60 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.0 Nm
User-configurable I/O: 3 DI, 1 DO
Built-in protections: over-voltage, over-current and position-error.
112.20 € 112.2 EUR
-
iCS-2435 Motor
Leadshine iCS-2435 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 24 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA24 (60 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.5 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
121.00 € 121.0 EUR
-
iCS-RS1706 Motor
Leadshine iCS-RS1706 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA 17 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA17 (42.0 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–36 VDC.
Holding torque: 0.6 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
99.00 € 99.0 EUR
-
iCS-RS1708 Motor
Leadshine iCS-RS1708 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA 17 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA17 (42.0 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–36 VDC.
Holding torque: 0.8 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
103.40 € 103.4 EUR
-
iCS-RS2313 Motor
Leadshine iCS-RS2313 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA23 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA23 (57.2 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–50 VDC.
Holding torque: 1.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.
110.00 € 110.0 EUR

Summer Break Notice

Dear clients and partners,

Sacom will be closed for summer holidays from August 4 to August 24.

We will resume operations on August 25 and will be ready to assist you as usual.

Online orders are welcome at any time, but all orders and shipments will be processed after our return.

Thank you for your understanding.

margin: 10 !important;