Block WEH27-CA-Z0-H is used in conjunction with the WER27R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEH27-CA-ZA-H is used in conjunction with the WER27R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEH35-CA-Z0-H is used in conjunction with the WER35R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

The WER 27R4000H rail is compatible with WE and QE series blocks.
WER 27R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

The WER 35R4000H rail is compatible with WE and QE series blocks.
WER 35R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

The WER 35T4000H rail is compatible with WE and QE series blocks.
WER 35T rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEW17-CC-ZA-H is used in conjunction with the WER17R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEW27-CC-Z0-H is used in conjunction with the WER27R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Block WEW35-CC-Z0-H is used in conjunction with the WER35R4000H profile rail.
The WE series features equal load ratings in the radial, reverse radial and the lateral direction. This along with the wide rail, allows the guide way to be rated for high loads, moments and rigidity. The ability to use a single rail and to have the low profile with a low center of gravity is ideal where space is limited and/or high moments are required.
Application: Automatic device, transportation device, precision measure equipment, semiconductor equipment, blow mounding machine, single axis robotics.

Product analogs:
305263D (SKF)
DE4019 (NTN)

Product analog:
DE3213 (NTN)

Leadshine iCS-1703 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.3 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-1706 to kompaktowe, zintegrowane rozwiązanie silnika krokowego „wszystko w jednym”, które łączy wysokowydajny silnik krokowy NEMA 17, cyfrowy sterownik mikrokrokowy oraz 14-bitowy inkrementalny enkoder magnetyczny.
Rozmiar ramy: NEMA17
Obsługiwane tryby sterowania: impuls + kierunek, CW/CCW oraz RS232/RS485
Zakres napięcia zasilania: 20–36 VDC
Moment trzymający: do 0,6 Nm
Konfigurowalne wejścia/wyjścia użytkownika: 3 DI, 1 DO
Wbudowane zabezpieczenia: przed przepięciem, nadprądem i błędem pozycji

Leadshine iCS-1708 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 17 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–36 VDC.
Holding torque: 0.8 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-2313 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 23 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 1.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-2321-L to kompaktowe, zintegrowane rozwiązanie silnika krokowego „wszystko w jednym”, które łączy wysokowydajny silnik krokowy NEMA 23, cyfrowy sterownik mikrokrokowy oraz 14-bitowy inkrementalny enkoder magnetyczny.
Rozmiar ramy: NEMA23 (57 mm)
Obsługiwane tryby sterowania: impuls + kierunek, CW/CCW oraz RS232/RS485
Zakres napięcia zasilania: 20–50 VDC
Moment trzymający: do 2,1 Nm
Konfigurowalne wejścia/wyjścia użytkownika: 3 DI, 1 DO
Wbudowane zabezpieczenia: przed przepięciem, nadprądem i błędem pozycji

Leadshine iCS-2323 to kompaktowe, zintegrowane rozwiązanie silnika krokowego „wszystko w jednym”, które łączy wysokowydajny silnik krokowy NEMA 23, cyfrowy sterownik mikrokrokowy oraz 14-bitowy inkrementalny enkoder magnetyczny.
Rozmiar ramy: NEMA23 (57 mm)
Obsługiwane tryby sterowania: impuls + kierunek, CW/CCW oraz RS232/RS485
Zakres napięcia zasilania: 20–50 VDC
Moment trzymający: do 2,3 Nm
Konfigurowalne wejścia/wyjścia użytkownika: 3 DI, 1 DO
Wbudowane zabezpieczenia: przed przepięciem, nadprądem i błędem pozycji

Leadshine iCS-2331-L is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 23 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.1 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-2430 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 24 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA24 (60 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.0 Nm
User-configurable I/O: 3 DI, 1 DO
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-2435 is a compact, all-in-one stepper motor solution that combines a high-performance NEMA 24 stepper motor, a digital microstepping drive and a 14-bit incremental magnetic encoder.
Frame size: NEMA24 (60 mm).
Supports Pulse+Direction and CW/CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.5 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-RS1706 to kompaktowy i inteligentny, zintegrowany napęd silnika krokowego, który łączy silnik krokowy NEMA 17 o wysokim momencie trzymającym, cyfrowy sterownik zamkniętej pętli oraz 14-bitowy inkrementalny enkoder magnetyczny w jednej obudowie.
Rozmiar ramy: NEMA17
Obsługiwane tryby sterowania: RS485 Modbus RTU
Zakres napięcia zasilania: 20–36 VDC
Moment trzymający: do 0,6 Nm
Konfigurowalne wejścia/wyjścia użytkownika: 3 DI, 1 DO
Wbudowane zabezpieczenia: przed przepięciem, nadprądem i błędem pozycji

Leadshine iCS-RS1708 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA 17 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA17 (42.0 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–36 VDC.
Holding torque: 0.8 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-RS2313 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA23 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA23 (57.2 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–50 VDC.
Holding torque: 1.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iCS-RS2323 is a compact and intelligent integrated stepper motor drive that combines a high-torque NEMA23 stepper motor, a digital closed-loop drive and a 14-bit incremental magnetic encoder in a single unit.
Frame size: NEMA23 (57.2 mm).
Support RS485 Modbus RTU communication.
Input voltage range: 20–50 VDC.
Holding torque: 2.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and position-error.

Leadshine iEM-1703 is a compact and cost-effective integrated stepper motor that combines a NEMA 17 stepper motor, a digital microstepping drive.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction control mode.
Input voltage range: 20–36 VDC.
Holding torque: 0.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage and over-current.

Leadshine iEM-1706 to kompaktowy i ekonomiczny zintegrowany silnik krokowy, który łączy silnik krokowy NEMA 17 oraz cyfrowy sterownik mikrokrokowy.
Rozmiar ramy: NEMA17
Obsługiwane tryby sterowania: impuls + kierunek oraz CW/CCW
Zakres napięcia zasilania: 20–36 VDC
Moment trzymający: do 0,6 Nm
Konfigurowalne wejścia/wyjścia użytkownika: 3 DI, 1 DO
Wbudowane zabezpieczenia: przed przepięciem i nadprądem

Leadshine iEM-1708 is a compact and cost-effective integrated stepper motor that combines a NEMA 17 stepper motor, a digital microstepping drive.
Frame size: NEMA17 (42.0 mm).
Supports Pulse+Direction control mode.
Input voltage range: 20–36 VDC.
Holding torque: 0.8 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage and over-current.

Leadshine iEM-2313 is a compact and cost-effective integrated stepper motor that combines a NEMA23 stepper motor, a digital microstepping drive.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW&CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 1.3 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and over-temperature.

Leadshine iEM-2321-L to kompaktowe i ekonomiczne zintegrowane rozwiązanie silnika krokowego, które łączy silnik krokowy NEMA 23 z wbudowanym cyfrowym sterownikiem mikrokrokowym.
Rozmiar ramy: NEMA23 (57 mm)
Obsługiwane tryby sterowania: impuls + kierunek oraz CW/CCW
Zakres napięcia zasilania: 20–50 VDC
Moment trzymający: do 2,1 Nm
Konfigurowalne wejścia/wyjścia użytkownika: 3 DI, 1 DO
Wbudowane zabezpieczenia: przed przepięciem, nadprądem i przegrzaniem

Leadshine iEM-RS1706 to kompaktowy i inteligentny zintegrowany silnik krokowy, który łączy silnik krokowy NEMA 17 ze wbudowanym cyfrowym sterownikiem mikrokrokowym i komunikacją RS485 Modbus RTU.
Rozmiar ramy: NEMA17
Obsługiwane tryby sterowania: RS485 Modbus RTU
Zakres napięcia zasilania: 20–36 VDC
Moment trzymający: do 0,6 Nm
Konfigurowalne wejścia/wyjścia użytkownika: 3 DI, 1 DO
Wbudowane zabezpieczenia: przed przepięciem i nadprądem

Leadshine iEM-2331-L is a compact and cost-effective integrated stepper motor that combines a NEMA23 stepper motor, a digital microstepping drive.
Frame size: NEMA23 (57.2 mm).
Supports Pulse+Direction and CW&CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.1 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage, over-current and over-temperature.

Leadshine iEM-2430 is a compact and cost-effective integrated stepper motor that combines a NEMA24 stepper motor, a digital microstepping drive.
Frame size: NEMA24 (60.0 mm).
Supports Pulse+Direction and CW&CCW control modes.
Input voltage range: 20–50 VDC.
Holding torque: 3.0 Nm.
User-configurable I/O: 3 DI, 1 DO.
Built-in protections: over-voltage and over-current.