Leadshine M860 sterownik silnika krokowego.
Napięcie wejściowe: 24 - 80 VDC.
Prąd wyjściowy: 1,80 - 7,20 A.
Sterownik M860 obsługuje tryby sterowania Krok+Kierunek (PUL/DIR) lub CW/CCW.
Sterownik silnika krokowego Leadshine M860 jest łatwy w konfiguracji za pomocą przełączników DIP.

Sterowniki PLC serii MC500 są kompatybilne z oprogramowaniem Codesys i Leadsys Studio

Sterowanie ruchem
Obsługa EtherCAT do 8 osi
Wyjście impulsowe dużej prędkości dla 6 osi — 200 kHz
Interpolacja liniowa do 6 osi, interpolacja kołowa do 3 osi
Zaawansowane funkcje ruchu: elektroniczny CAM (E-CAM)

Inteligentne połączenia
Obsługa protokołów komunikacyjnych OPC UA i EtherNet/IP
Rozproszona kontrola CANopen do 32 węzłów
Port Modbus i wolny port komunikacyjny do elastycznej integracji

Rozbudowana funkcjonalność
Rozszerzenie magistrali lokalnej do 32 modułów I/O
Łączna pojemność I/O do 32 767 punktów
6 szybkich liczników (200 kHz)
Wbudowane zabezpieczenia: przed przegrzaniem, przepięciem i zwarciem

Pamięć i przechowywanie danych
Pamięć programu: 20 MB
Pamięć danych: 40 MB
Obszar trwały: 512 KB (na wypadek awarii zasilania)
Gniazdo kart SD: obsługuje standardowe karty microSD (FAT32), maksymalna pojemność do 32 GB na programy i dane

Specyfikacja wejść/wyjść cyfrowych
Wejścia cyfrowe: łącznie 16
12 szybkich wejść (200 kHz)
4 standardowe wejścia (1 kHz), konfigurowalne NPN/PNP
Wyjścia cyfrowe: łącznie 16
12 szybkich wyjść (200 kHz)
4 standardowe wyjścia (10 kHz), typ NPN

Obsługiwane języki programowania: ST, LD, CFC, SFC, FBD, IL

Sterowniki PLC serii MC500 są kompatybilne z oprogramowaniem Codesys i Leadsys Studio

Sterowanie ruchem
Obsługa EtherCAT do 16 osi
Wyjście impulsowe dużej prędkości dla 6 osi — 200 kHz
Interpolacja liniowa do 6 osi, interpolacja kołowa do 3 osi
Zaawansowane funkcje ruchu: elektroniczny CAM (E-CAM)

Inteligentne połączenia
Obsługa protokołów komunikacyjnych OPC UA i EtherNet/IP
Rozproszona kontrola CANopen do 32 węzłów
Port Modbus i wolny port komunikacyjny do elastycznej integracji

Rozbudowana funkcjonalność
Rozszerzenie magistrali lokalnej do 32 modułów I/O
Łączna pojemność I/O do 32 767 punktów
6 szybkich liczników (200 kHz)
Wbudowane zabezpieczenia: przed przegrzaniem, przepięciem i zwarciem

Pamięć i przechowywanie danych
Pamięć programu: 20 MB
Pamięć danych: 40 MB
Obszar trwały: 512 KB (na wypadek awarii zasilania)
Gniazdo kart SD: obsługuje standardowe karty microSD (FAT32), maksymalna pojemność do 32 GB na programy i dane

Specyfikacja wejść/wyjść cyfrowych
Wejścia cyfrowe: łącznie 16
12 szybkich wejść (200 kHz)
4 standardowe wejścia (1 kHz), konfigurowalne NPN/PNP
Wyjścia cyfrowe: łącznie 16
12 szybkich wyjść (200 kHz)
4 standardowe wyjścia (10 kHz), typ NPN

Obsługiwane języki programowania: ST, LD, CFC, SFC, FBD, IL

Sterowniki PLC serii MC500 są kompatybilne z oprogramowaniem Codesys i Leadsys Studio

Sterowanie ruchem
Obsługa EtherCAT do 32 osi
Wyjście impulsowe dużej prędkości dla 6 osi — 200 kHz
Interpolacja liniowa do 6 osi, interpolacja kołowa do 3 osi
Zaawansowane funkcje ruchu: elektroniczny CAM (E-CAM)

Inteligentne połączenia
Obsługa protokołów komunikacyjnych OPC UA i EtherNet/IP
Rozproszona kontrola CANopen do 32 węzłów
Port Modbus i wolny port komunikacyjny do elastycznej integracji

Rozbudowana funkcjonalność
Rozszerzenie magistrali lokalnej do 32 modułów I/O
Łączna pojemność I/O do 32 767 punktów
6 szybkich liczników (200 kHz)
Wbudowane zabezpieczenia: przed przegrzaniem, przepięciem i zwarciem

Pamięć i przechowywanie danych
Pamięć programu: 20 MB
Pamięć danych: 40 MB
Obszar trwały: 512 KB (na wypadek awarii zasilania)
Gniazdo kart SD: obsługuje standardowe karty microSD (FAT32), maksymalna pojemność do 32 GB na programy i dane

Specyfikacja wejść/wyjść cyfrowych
Wejścia cyfrowe: łącznie 16
12 szybkich wejść (200 kHz)
4 standardowe wejścia (1 kHz), konfigurowalne NPN/PNP
Wyjścia cyfrowe: łącznie 16
12 szybkich wyjść (200 kHz)
4 standardowe wyjścia (10 kHz), typ NPN

Obsługiwane języki programowania: ST, LD, CFC, SFC, FBD, IL

Block MGN07-CZ-0H-M is used in conjunction with the MGNR07R600HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGN07-HZ-0H-M is used in conjunction with the MGNR07R600HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGN09-CZ-1H-MEL is used in conjunction with the MGNR09R1200HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGN12-CZ-0H-M is used in conjunction with the MGNR12R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGN12-HZ-0H-M is used in conjunction with the MGNR12R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGN15-CZ-0H-M is used in conjunction with the MGNR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGN15-HZ-0H-M is used in conjunction with the MGNR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

The MGNR 07R600HM rail is compatible with MGN series blocks.
MGNR 07R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.

The MGNR 09R1200HM rail is compatible with MGN series blocks.
MGNR 09R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.

The MGNR 12R2000HM rail is compatible with MGN series blocks.
MGNR 12R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.

The MGNR 15R2000HM rail is compatible with MGN series blocks.
MGNR 15R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW09-CZ-0H-M is used in conjunction with the MGWR09R1200HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW09-HZ-0H-M is used in conjunction with the MGWR09R1200HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW12-CZ-0H-M is used in conjunction with the MGWR12R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW15-CZ-0H-M is used in conjunction with the MGWR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

Block MGW15-HZ-0H-M is used in conjunction with the MGWR15R2000HM profile rail.
Miniature linear guideways series MG:
1. Tiny and light weight, suitable for miniature equipment.
2. Gothic arch contact design can sustain loads from all directions and offer high rigidity and high accuracy.
Application: miniature device, semiconductor equipment, medical equipment.

The MGWR 09R1200HM rail is compatible with MGW series blocks.
MGWR 09R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.

The MGWR 12R2000HM rail is compatible with MGW series blocks.
MGWR 12R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.

The MGWR 15R2000HM rail is compatible with MGW series blocks.
MGWR 15R rail can be cut and joined based on customer’s request, taking into account the length requirements, using high-precision equipment, using the manufacturer’s technologies, including cutting, grinding and joining of several rails.
Application: miniature device, semiconductor equipment, medical equipment.

Cross References
HGR15R4000H / HGR15T4000H (HIWIN)
TR154000N (TBI)
SBI15-4000L / SBI15-4000L-B (SBC)
R160510331 / R160710331 (Rexroth)
HSR15A2UU+4000LH (THK)
LLRHC15-4000P3 (Ewellix)

These profile rails are applicable to both MSA and SMA series linear guides from PMI.

The MSA15 linear guide from PMI with High (H) and Normal (N) accuracy grade is designed for applications that require high precision, smooth motion, and reliability under dynamic loads. It is widely used in machine tools, automation systems, 3D printers, and other industrial machinery.

Podwójne dwukierunkowe uszczelnienie końcowe + uszczelnienie dolne

Podwójne dwukierunkowe uszczelnienie końcowe + uszczelnienie dolne + zgarniacz

Jednostka smarownicza typu SL została zaprojektowana ze zbiornikiem oleju, który jest wyposażony w siatkę z włókien o wysokiej gęstości.

Dwukierunkowe uszczelnienie końcowe + uszczelnienie dolne + zgarniacz

The MSA15 linear guide from PMI with High (H) and Normal (N) accuracy grade is designed for applications that require high precision, smooth motion, and reliability under dynamic loads. It is widely used in machine tools, automation systems, 3D printers, and other industrial machinery.

These profile rails are applicable to both MSA and SMA series linear guides from PMI.

Delivery Terms:
- Cutting and docking are included in the product price and are performed using specialized equipment in accordance with the manufacturer's specifications to ensure precision and reliability.
- The price is specified per millimeter of length.
- If required, please specify the distance from the rail end to the first mounting hole (DISTANCE TO END "E").
Note: the maximum length of a single rail cannot exceed 4000 mm. Longer rails will be supplied in multiple precisely docked sections.

MSA15E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW15CAZAH / HGW15CAZ0H (HIWIN)
TRH15FNNZ0 (TBI)
SBI15FLNK2 / SBI15FLNK0 (SBC)
R165111420 / R165119320 (Rexroth)
HSR15ASSH (THK)
LLRHC15AT1P3 (Ewellix)
HRC15FNV2H / HRC15FNV1H (CPC)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA15S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH15CAZAH / HGH15CAZ0H (HIWIN)
TRH15VNNZ0 (TBI)
SBI15SLK2 (SBC)
R162211420 (Rexroth)
HSR15CRSSH (THK)
LLRHC15UT1P3 (Ewellix)
HRC15MNV2H / HRC15MNV1H (CPC)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

Cross References
HGR20R4000H / HGR20T4000H (HIWIN)
TR204000N (TBI)
SBI20-4000L / SBI20-4000L-B (SBC)
R160580331 / R160780331 (Rexroth)
HSR20A2UU+4000LH (THK)
LLRHC20-4000P3 (Ewellix)

These profile rails are applicable to both MSA and SMA series linear guides from PMI.

The MSA20 linear guide from PMI with High (H) and Normal (N) accuracy grade is designed for applications that require high precision, smooth motion, and reliability under dynamic loads. It is widely used in machine tools, automation systems, 3D printers, and other industrial machinery.