Cross References
EGW35SCZBH (HIWIN)
TRS35FSNZ0 (TBI)
SR35SBUC0H (THK)
MSB35TE is a short length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). Short carriages are mainly used in pairs. The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGW35SCZ0H (HIWIN)
TRS35FSNZ0 (TBI)
SR35SBUH (THK)
MSB35TE is a short length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). Short carriages are mainly used in pairs. The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

MSB35TE is a short length low flange carriage. The mounting holes are accessible from either the top (S1) or the bottom (S2). Short carriages are mainly used in pairs. The MSB series is used for the most compact solution for light to normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TE) or normal (MSB-E). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGH35SAZAH (HIWIN)
TRS35VSZ0 (TBI)
SR35VUUC1H (THK)
MSB35TS is a short length low narrow square type carriage. Fastening holes are only accessible from the top. Short carriages are mostly used in pairs. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGH35SAZBH (HIWIN)
TRS35VSZ0 (TBI)
SR35VUUC0H (THK)
MSB35TS is a short length low narrow square type carriage. Fastening holes are only accessible from the top. Short carriages are mostly used in pairs. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

Cross References
EGH35SAZ0H (HIWIN)
TRS35VSZ0 (TBI)
SR35VUUH (THK)
MSB35TS is a short length low narrow square type carriage. Fastening holes are only accessible from the top. Short carriages are mostly used in pairs. The MSB-Series is used for the most compact solution for light and normal loads.

The MSB series of linear guideway from PMI is a series with an installation height lower than the standard MSA series. Carriages is available in two lengths: short (MSB-TS) or normal (MSB-S). These linear guides are typically used in applications that require the most compact solution. The MSB series is preloaded from stock to 2% of the dynamic load rating. It can also be ordered with the MSAxxSL lubrication block, which is retrofitted onto the carriage and makes the carriage maintenance-free for 25,000 km under normal conditions.

MSC12LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN12HZ1H (HIWIN)
TM12NLAZ1 (TBI)
RSR12M1NUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC12LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN12HZ0H (HIWIN)
TM12NLAZ0 (TBI)
RSR12M1NUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC12LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN12HZFH (HIWIN)
TM12NLAZF (TBI)
RSR12M1NUUC0 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC12M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN12CZ1H (HIWIN)
TM12NNAZ1 (TBI)
RSR12M1KUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC12M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN12CZ0H (HIWIN)
TM12NNAZ0 (TBI)
RSR12M1KUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC12M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN12CZFH (HIWIN)
TM12NNAZF (TBI)
RSR12M1KUU (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

Cross References
MGNR12R2000HM (HIWIN)
TM12-2000-H(TBI)
RSR12-2000L-P (THK)

MSC15LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN15HZ1H (HIWIN)
TM15NLAZ1 (TBI)
RSR15M1NUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC15LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN15HZ0H (HIWIN)
TM15NLAZ0 (TBI)
RSR15M1NUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC15LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN15HZFH (HIWIN)
TM15NLAZF (TBI)
RSR15M1NUUC0 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC15M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN15CZ1H (HIWIN)
TM15NNAZ1 (TBI)
RSR15M1KUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC15M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN15CZ0H (HIWIN)
TM15NNAZ0 (TBI)
RSR15M1KUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC15M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN15CZFH (HIWIN)
TM15NNAZF (TBI)
RSR15M1KUU (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

Cross References
MGNR15R2000HM (HIWIN)
TM15-2000-H(TBI)
RSR15-2000L-P (THK)

MSC7LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN7HZ1H (HIWIN)
TM7NLAZ1 (TBI)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC7LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN7HZ0H (HIWIN)
TM7NLAZ0 (TBI)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC7LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN7HZFH (HIWIN)
TM7NLAZF (TBI)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC7M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN7CZ1H (HIWIN)
TM7NNAZ1 (TBI)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC7M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN7CZ0H (HIWIN)
TM7NNAZ0 (TBI)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC7M is a narrow square type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN7CZFH (HIWIN)
TM7NNAZF (TBI)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

Cross References
MGNR7R2000HM (HIWIN)
TM7-2000-H(TBI)
RSR7-2000L-P (THK)

MSC9LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN9HZ1H (HIWIN)
TM9NLAZ1 (TBI)
RSR9M1NUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.

MSC9LM is a Long type of miniature carriage PMI, can be installed from top side of carriage.

Cross References
MGN9HZ0H (HIWIN)
TM9NLAZ0 (TBI)
RSR9M1NUUC1 (THK)

Rail and carriage of MSC series are manufactured in stainless steel. Withstands corrosive environments better than normal steel linear guides.
No play with 0% preloading of dynamic load rating. Miniature linear guide are particularly suitable for smaller and lighter linear movements where a compact installation height is required.