Shafts

SBR shafts are precision-ground cylindrical guides mounted on an aluminum support rail, which simplifies installation and increases structural rigidity. This support ensures stable alignment and reduces bending, allowing SBR shafts to operate reliably under medium loads in CNC machines, 3D printers, and various automated systems.

Diameter: 10 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

SBR shafts are precision-ground cylindrical guides mounted on an aluminum support rail, which simplifies installation and increases structural rigidity. This support ensures stable alignment and reduces bending, allowing SBR shafts to operate reliably under medium loads in CNC machines, 3D printers, and various automated systems.

Cross References:
R1014 012 00 (Rexroth)
FTSN12GW (FLI)
TSNW12 (INA)

Diameter: 12 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

SBR shafts are precision-ground cylindrical guides mounted on an aluminum support rail, which simplifies installation and increases structural rigidity. This support ensures stable alignment and reduces bending, allowing SBR shafts to operate reliably under medium loads in CNC machines, 3D printers, and various automated systems.

Cross References:
R1014 016 00 (Rexroth)
FTSN16GW (FLI)
TSNW16 (INA)

Diameter: 16 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

SBR shafts are precision-ground cylindrical guides mounted on an aluminum support rail, which simplifies installation and increases structural rigidity. This support ensures stable alignment and reduces bending, allowing SBR shafts to operate reliably under medium loads in CNC machines, 3D printers, and various automated systems.

Cross References:
R1014 020 00 (Rexroth)
FTSN20GW (FLI)
TSNW20 (INA)

Diameter: 20 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

SBR shafts are precision-ground cylindrical guides mounted on an aluminum support rail, which simplifies installation and increases structural rigidity. This support ensures stable alignment and reduces bending, allowing SBR shafts to operate reliably under medium loads in CNC machines, 3D printers, and various automated systems.

Cross References:
R1014 025 00 (Rexroth)
FTSN25GW (FLI)
TSNW25 (INA)

Diameter: 25 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

SBR shafts are precision-ground cylindrical guides mounted on an aluminum support rail, which simplifies installation and increases structural rigidity. This support ensures stable alignment and reduces bending, allowing SBR shafts to operate reliably under medium loads in CNC machines, 3D printers, and various automated systems.

Cross References:
R1014 030 00 (Rexroth)
FTSN30GW (FLI)
TSNW30 (INA)

Diameter: 30 mm.
Length: 5900 mm.
Tolerance: h6.
Material: C45.

This rail does not require end fasteners, as the shaft is supported along its entire length by an aluminum support with holes for mounting on the frame. With this design, there is no shaft deflection over long lengths, so SBR guides can be used for CNC machines with large working areas, unlike conventional polished shafts.

Diameter: 35 mm.
Length: 5900 mm.
Tolerance: h6.
Material: C45.

SBR shafts are precision-ground cylindrical guides mounted on an aluminum support rail, which simplifies installation and increases structural rigidity. This support ensures stable alignment and reduces bending, allowing SBR shafts to operate reliably under medium loads in CNC machines, 3D printers, and various automated systems.

Cross References:
R1014 040 00 (Rexroth)
FTSN40GW (FLI)
TSNW40 (INA)

Diameter: 40 mm.
Length: 5900 mm.
Tolerance: h6.
Material: C45 hardened steel.

SBR shafts are precision-ground cylindrical guides mounted on an aluminum support rail, which simplifies installation and increases structural rigidity. This support ensures stable alignment and reduces bending, allowing SBR shafts to operate reliably under medium loads in CNC machines, 3D printers, and various automated systems.

Cross References:
R1014 050 00 (Rexroth)
FTSN50GW (FLI)
TSNW50 (INA)

Diameter: 50 mm.
Length: 5900 mm.
Tolerance: h6.
Material: C45 hardened steel.

TBR shafts have a similar design to SBR, but their aluminum support is reinforced and more massive, significantly increasing the load-bearing capacity of the system. This robust support provides greater rigidity and resistance to heavy loads, making TBR shafts suitable for demanding industrial equipment and machines where high strength and minimal deflection are required.

Cross References:
R1010 016 00 (Rexroth)
TSWW16 (INA)

Diameter: 16 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

TBR shafts have a similar design to SBR, but their aluminum support is reinforced and more massive, significantly increasing the load-bearing capacity of the system. This robust support provides greater rigidity and resistance to heavy loads, making TBR shafts suitable for demanding industrial equipment and machines where high strength and minimal deflection are required.

Cross References:
R1010 020 00 (Rexroth)
TSWW20 (INA)

Diameter: 20 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

TBR shafts have a similar design to SBR, but their aluminum support is reinforced and more massive, significantly increasing the load-bearing capacity of the system. This robust support provides greater rigidity and resistance to heavy loads, making TBR shafts suitable for demanding industrial equipment and machines where high strength and minimal deflection are required.

Cross References:
R1010 025 00 (Rexroth)
TSWW25 (INA)

Diameter: 25 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

TBR shafts have a similar design to SBR, but their aluminum support is reinforced and more massive, significantly increasing the load-bearing capacity of the system. This robust support provides greater rigidity and resistance to heavy loads, making TBR shafts suitable for demanding industrial equipment and machines where high strength and minimal deflection are required.

Cross References:
R1010 030 00 (Rexroth)
TSWW30 (INA)

Diameter: 30 mm.
Length: 5900 mm.
Tolerance: h6.
Material: C45.

Precision linear shaft made of chrome-alloyed steel.

Diameter: 5 mm.
Tolerance: h6.
Material: C45 (1.0503, AISI 1045)
Material options: Cf53 (1.1213, AISI 1055)

You can order the shaft in your required length by specifying the desired number of millimeters in the order field.
We can also machine the shaft according to your requirements — some options are shown in the illustration.
If you need a special design, please send your drawing to info@sacom.lt.

LJM08-3000 - SKF
SN08-3000 - NB
WB08-3000 - INA
1000-008-00 - Rexroth
• Steel grade CF53 shaft (surface treatment and chamfering is
possible)
• Induction hardened and ground linear shaft
• Shaft processing according to customer drawings

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 010 00 (Rexroth)
LJM 10 (Ewellix)
W 10 (FLI)
W10 (INA)

Diameter: 10 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

LJM10-3000 - SKF
SN10-3000 - NB
WB10-3000 - INA
1000-010-00 - Rexroth
• Steel grade CF53 shaft (surface treatment and chamfering is
possible)
• Induction hardened and ground linear shaft
• Shaft processing according to customer drawings

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 100 00 (Rexroth)
W 100 (FLI)

Diameter: 100 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 110 00 (Rexroth)

Diameter: 110 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 012 00 (Rexroth)
LJM 12 (Ewellix)
W 12 (FLI)
W12 (INA)

Diameter: 12 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

LJM12-3000 - SKF
SN12-3000 - NB
WB12-3000 - INA
1000-012-00 - Rexroth
• Steel grade CF53 shaft (surface treatment and chamfering is
possible)
• Induction hardened and ground linear shaft
• Shaft processing according to customer drawings

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Diameter: 120 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
W 13 (FLI)

Diameter: 13 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 014 00 (Rexroth)
LJM 14 (Ewellix)
W 14 (FLI)
W14 (INA)

Diameter: 14 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 015 00 (Rexroth))
W 15 (FLI)
W15 (INA)

Diameter: 15 mm.
Length: 4000 mm.
Tolerance: h6.
Material: C45.

LJM15-3000 - SKF
SN15-3000 - NB
WB15-3000 - INA
1000-015-00 - Rexroth
• Steel grade CF53 shaft (surface treatment and chamfering is
possible)
• Induction hardened and ground linear shaft
• Shaft processing according to customer drawings

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 016 00 (Rexroth)
LJM 16 (Ewellix)
W 16 (FLI)
W16 (INA)

Diameter: 16 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

LJM16-3000 - SKF
SN16-3000 - NB
WB16-3000 - INA
1000-016-00 - Rexroth
• Steel grade CF53 shaft (surface treatment and chamfering is
possible)
• Induction hardened and ground linear shaft
• Shaft processing according to customer drawings

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Diameter: 17 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 018 00 (Rexroth)
W 18 (FLI)
W18 (INA)

Diameter: 18 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Diameter: 19 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.

High-precision cylindrical shafts made of hardened steel, used in CNC machines, 3D printers, and automated lines to ensure smooth and accurate linear motion and torque transmission.

Cross References:
R1000 020 00 (Rexroth)
LJM 20 (Ewellix)
W 20 (FLI)
W20 (INA)

Diameter: 20 mm.
Length: 6000 mm.
Tolerance: h6.
Material: C45.