MSA30LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30HAZAH (HIWIN)
TRH30FENZ0 (TBI)
SBI30FLLNK2 (SBC)
R165371320 (Rexroth)
HSR30HASSH (THK)
LLRHC30LAT1P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30HAZBH (HIWIN)
TRH30FENZ0 (TBI)
SBI30FLLNK3 (SBC)
R165372320 (Rexroth)
HSR30LASSС0H (THK)
LLRHC30LAT0P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW30HAZ0H (HIWIN)
TRH20FENZ0 (TBI)
SBI20FLLNK1 (SBC)
R165379320 (Rexroth)
HSR20HASSH (THK)
LLRHC30LUT1P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30HAZAH (HIWIN)
TRH30VENZ0 (TBI)
SBI30SLLNK1 (SBC)
R162371330 (Rexroth)
HSR30HRSSH (THK)
LLRHC30LUT2P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30HAZBH (HIWIN)
TRH30VENZ0 (TBI)
SBI30SLLNK3 (SBC)
R162372320 (Rexroth)
HSR30HRSSC0H (THK)
LLRHC30LUT2P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30HAZ0H (HIWIN)
TRH30VENZ0 (TBI)
SBI30SLLNK1 (SBC)
R162379320 (Rexroth)
HSR30HRSSH (THK)
LLRHC30LUT0P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

Cross References
HGR30R4000H (HIWIN)
TR304000N (TBI)
SBI30-4000L (SBC)
R160570431 (Rexroth)
HSR30A2UU+4000LH (THK)
LLRHC30-4000P3 (Ewellix)
MSA-series applications:
Machine Center
NC Lathe
XYZ Axes of Heavy Cutting Machine Tools
Grinding Machine Working Table
Feed Shaft of Milling Machine
Vertical or Horizontal Boring Machine
Z Axis of Boring Machine and Machine Tools
Auto Coating Machine
Industrial Robot
Various High Speed Material Supply Device
Z Axis of Industiral Machine
Binding Machine
EDM
Measuring Equipment
Precision XY Table

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZAH (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK2 (SBC)
R162271320 (Rexroth)
HSR30CRSSC1H(THK)
LLRHC30UT1P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZBH (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK3 (SBC)
R162272320 (Rexroth)
HSR30RSSC0H(THK)
LLRHC30UT1P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZ0H (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK1 (SBC)
R162279320 (Rexroth)
HSR30CRSSH(THK)
LLRHC30UT0P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA30S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH30CAZAH+ZZ (HIWIN)
TRH30VNNZ0 (TBI)
SBI30SLK2 (SBC)
R165371320 (Rexroth)
HSR30CRZZC1H (THK)
LLRHC30UT1P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

Cross References
HGR30T4000H (HIWIN)
TR304000N (TBI)
SBI30-4000L-B (SBC)
R160770331 (Rexroth)
HSR305A2UU+4000LHK (THK)
LLRHC30-4000P3 (Ewellix)
MSA-series applications:
Machine Center
NC Lathe
XYZ Axes of Heavy Cutting Machine Tools
Grinding Machine Working Table
Feed Shaft of Milling Machine
Vertical or Horizontal Boring Machine
Z Axis of Boring Machine and Machine Tools
Auto Coating Machine
Industrial Robot
Various High Speed Material Supply Device
Z Axis of Industiral Machine
Binding Machine
EDM
Measuring Equipment
Precision XY Table

Double bidirectional End seal + Bottom seal

Double bidirectional End seal + Bottom seal + Scraper

SL lubricator unit is designed with an oil reservoir which equipped with a high-density fiber net.

Bidirectional End seal + Bottom seal + Scraper

MSA35E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW35CAZAH (HIWIN)
TRH35FNNZ0 (TBI)
SBI35FLNK2 (SBC)
R165131320 (Rexroth)
HSR35ASSC1H (THK)
LLRHC35AT1P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW35CAZBH (HIWIN)
TRH35FNNZ0 (TBI)
SBI35FLNK3 (SBC)
R165132320 (Rexroth)
HSR35ASSC0H (THK)
LLRHC35AT2P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35E is a carriage with installation on both (top or bottom) sides.

Cross References
HGW35CAZ0H (HIWIN)
TRH35FNNZ0 (TBI)
SBI35FLNK1 (SBC)
R165139320 (Rexroth)
HSR35ASSH (THK)
LLRHC35AT0P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW35HAZAH (HIWIN)
TRH35FENZ0 (TBI)
SBI35FLLNK2 (SBC)
R165331320 (Rexroth)
HSR35HASSH (THK)
LLRHC35LAT0P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW35HAZBH (HIWIN)
TRH35FENZ0 (TBI)
SBI35FLLNK3 (SBC)
R165332320 (Rexroth)
HSR35HASSC0H (THK)
LLRHC35LAT2P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35LE (Long Flange) is a carriage with installation on both (top or bottom) sides.

Cross References
HGW35HAZAH (HIWIN)
TRH35FENZ0 (TBI)
SBI35FLLNK1 (SBC)
R165339320 (Rexroth)
HSR35LASSH (THK)
LLRHC35LAT0P3 (Ewellix)

The MSA-E/LE is a carriage with flange. This carriage is available in two different lengths, normal (MSA-E) or long (MSA-LE). Fastening holes are accessible either from top (S1) or bottom (S2). Full ball MSA-Series is especially suited for high precision and high rigidity required motion, for normal and high load.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH35HAZAH (HIWIN)
TRH35VENZ0 (TBI)
SBI35SLLNK1 (SBC)
R165382320 (Rexroth)
HSR35HRSSH (THK)
LLRHC35LUT0P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH35HAZBH (HIWIN)
TRH35VENZ0 (TBI)
SBI35SLLNK3 (SBC)
R165322320
(Rexroth)
HSR35HRSSC0H (THK)
LLRHC35LUT2P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35LS is a Long Narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH35HAZ0H (HIWIN)
TRH35VENZ0 (TBI)
SBI35SLLNK1 (SBC)
R165329320 (Rexroth)
HSR35HASSH (THK)
LLRHC35LUT0P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

Cross References
HGR30T4000H (HIWIN)
TR304000N (TBI)
SBI30-4000L-B (SBC)
R160770331 (Rexroth)
HSR305A2UU+4000LHK (THK)
LLRHC30-4000P3 (Ewellix)
MSA-series applications:
Machine Center
NC Lathe
XYZ Axes of Heavy Cutting Machine Tools
Grinding Machine Working Table
Feed Shaft of Milling Machine
Vertical or Horizontal Boring Machine
Z Axis of Boring Machine and Machine Tools
Auto Coating Machine
Industrial Robot
Various High Speed Material Supply Device
Z Axis of Industiral Machine
Binding Machine
EDM
Measuring Equipment
Precision XY Table

MSA35S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH35CAZAH (HIWIN)
TRH35VNNZ0 (TBI)
SBI35SLK2 (SBC)
R162231320 (Rexroth)
HSR35CRSSC1H(THK)
LLRHC35UT0P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH35CAZBH (HIWIN)
TRH35VNNZ0 (TBI)
SBI35SLK3 (SBC)
R162232320 (Rexroth)
HSR35CRSSC0H(THK)
LLRHC35UT2P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.

MSA35S is a narrow type of PMI linear guideway, can be installed from top side of carriage.

Cross References
HGH35CAZ0H (HIWIN)
TRH35VNNZ0 (TBI)
SBI35SLK1 (SBC)
R162239320 (Rexroth)
HSR35CRSSH(THK)
LLRHC45AT0P3 (Ewellix)

The MSA S/LS represents a streamlined square-shaped carriage, offered in both standard (MSA-S) and extended (MSA-LS) lengths. Notably, mounting holes are exclusively positioned on the upper side. Specifically tailored for applications demanding both precision and robustness, the MSA Series caters to both regular and substantial load requirements.
Characteristics:
• Heavy Load, High Rigidity
• Self Alignment Capability
• Smooth Movement
• Low Noise
• Interchangeability.