Apdirbti sraigtai

The BF25-FF25/E10 ball screw end machining is used for BF25-C5 and FF25-C5 floating bearing supports.
This processing is performed on rolled shafts R32-05, R32-10, R32-32.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The BF30-FF30/E10 ball screw end machining is used for BF30-C5 and FF30-C5 floating bearing supports.
This processing is performed on rolled shafts R40-05, R40-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The BK25/E9 ball screw end machining is used for BK25-C5 floating bearing supports.
This processing is performed on rolled shafts R32-05, R32-10, R32-32.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The BK30/E9 ball screw end machining is used for BK30-C5 floating bearing supports.
This processing is performed on rolled shafts R40-05, R40-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The BK30/E91 ball screw end machining is used for BK30-C5 floating bearing supports.
This processing is performed on rolled shafts R40-05, R40-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The BK40/E9 ball screw end machining is used for BK40-C5 floating bearing supports.
This processing is performed on rolled shafts R50-10, R50-20.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The BK40/E91 ball screw end machining is used for BK40-C5 floating bearing supports.
This processing is performed on rolled shafts R50-10, R50-20.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EF10-FF10/E10 ball screw end machining is used for EF10-C5 and FF10-C5 floating bearing supports.
This processing is performed on rolled shafts R15-05, R16-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EF15-FF15/E10 ball screw end machining is used for EF15-C5 and FF15-C5 floating bearing supports.
This processing is performed on rolled shafts R20-05.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EF20-FF20/E10 ball screw end machining is used for EF20-C5 and FF20-C5 floating bearing supports.
This processing is performed on rolled shafts R25-05, R25-10, R25-25.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EK10-FK10/E8 ball screw end machining is used for EK10-C5 and FK10-C5 floating bearing supports.
This processing is performed on rolled shafts R15-05, R16-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EK10-FK10/E81 ball screw end machining is used for EK10-C5 and FK10-C5 floating bearing supports.
This processing is performed on rolled shafts R15-05, R16-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EK15-FK15/E8 ball screw end machining is used for EK15-C5 and FK15-C5 floating bearing supports.
This processing is performed on rolled shafts R20-05.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EK15-FK15/E81 ball screw end machining is used for EK15-C5 and FK15-C5 floating bearing supports.
This processing is performed on rolled shafts R20-05.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EK20-FK20/E8 ball screw end machining is used for EK20-C5 and FK20-C5 floating bearing supports.
This processing is performed on rolled shafts R25-05, R25-10, R25-25.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The EK20-FK20/E81 ball screw end machining is used for EK20-C5 and FK20-C5 floating bearing supports.
This processing is performed on rolled shafts R25-05, R25-10, R25-25.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

Turning of ball screw shaft ends for fixed supports is performed using a full technological cycle: induction tempering to stabilize the material, initial straightening to align the screw, precision turning of the seating surfaces, and final straightening to achieve perfect linearity. This comprehensive approach ensures accurate shaft ends, reliable support fixation, and long service life of the ball screw assembly.

Turning of ball screw shaft ends for support bearing is carried out using a full technological cycle: induction tempering to stabilize the material, initial straightening to align the screw, precision turning of the mounting surfaces, and final straightening to achieve perfect linearity. This comprehensive approach ensures accurate shaft ends, reliable support fit, and a long service life of the ball screw assembly.

The FK25/E8 ball screw end machining is used for FK25 floating bearing supports.
This processing is performed on rolled shafts R32-05, R32-10, R32-32.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The FK25/E81 ball screw end machining is used for FK25 floating bearing supports.
This processing is performed on rolled shafts R32-05, R32-10, R32-32.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The FK30/E8 ball screw end machining is used for FK30-C5 floating bearing supports.
This processing is performed on rolled shafts R40-05, R40-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.

The FK30/E81 ball screw end machining is used for FK30-C5 floating bearing supports.
This processing is performed on rolled shafts R40-05, R40-10.
Turning is carried out on high-precision CNC machines using the technology of the manufacturer approved by HIWIN.